Bolts, setscrews and studs all perform a similar basic job: they hold components together. Look more closely, however, and there are important differences in their shape, threading and the way they are installed.
Understanding those differences becomes particularly important in industrial engineering, where the correct fastener may need to cope with high loads, temperature changes, corrosion or repeated maintenance.
What Is a Bolt?
In common UK engineering terminology, a hex bolt has a head at one end and is usually only partially threaded. The remaining section is a smooth, unthreaded shank.
During assembly, the bolt passes through the components being joined and is commonly secured with a nut. Depending on the design of the joint, the plain section of the bolt may pass through the parts while the threaded section engages with the nut.
Partially threaded bolts are widely used in structural, mechanical and industrial assemblies. Canmec manufactures custom bolts in forms including hex bolts, flange bolts, fitted bolts, eye bolts, U bolts and square head bolts.
The required diameter, thread, length, material and strength should always be determined from the application rather than simply replacing a bolt with something that appears similar.
What Is a Setscrew?
The terminology around setscrews can occasionally cause confusion.
In the context of hex-headed engineering fasteners, a setscrew is generally threaded along its full length, or very close to the underside of the head. ISO 4017, for example, covers fully threaded hexagon head setscrews, distinguishing them from partially threaded hex bolts.
This full thread makes setscrews useful where thread engagement is needed at different points along the fastener or where a shorter fastener does not leave enough length for a plain shank.
Canmec produces custom setscrews in different thread types, lengths and materials for applications including machinery, structural assemblies and industrial equipment.
It is worth checking terminology when ordering because “set screw” can also describe a headless socket set screw, often called a grub screw. These are normally used to secure one component against another, such as fixing a pulley onto a shaft.
What Is a Stud?
A stud normally has no conventional bolt head.
Some studs are threaded along their entire length, while others have threads at both ends with an unthreaded section between them. An engineering stud may have one end screwed permanently into a tapped hole, leaving the other end available for a component and nut.
Studbolts used for flange connections are commonly fully threaded and secured using nuts at both ends. Canmec’s custom studs include studbolts, double-ended studs, waisted studs, engineer studs, tie bars and collar studs.
This arrangement can be particularly useful for pressure vessels, pipelines and other assemblies that need reliable clamping across a joint. Canmec identifies flanged connections, pressure vessels and demanding pipeline applications among the uses for our studbolts.
When Should You Choose a Bolt or Setscrew?
The choice often comes down to the design of the joint.
A partially threaded bolt may be suitable where the plain shank needs to pass through the components being joined. A fully threaded setscrew gives more flexibility where thread engagement is required over a greater part of the fastener length.
For non-standard equipment, custom bolts and custom setscrews may be required when standard dimensions, thread forms or materials do not match the original design.
Material also matters. Fasteners can be manufactured from carbon steel, stainless steel, duplex grades, nickel alloys and other specialist materials according to the loads and environment they will experience.
When Are Studs the Better Option?
Studs are particularly useful where equipment needs to be dismantled repeatedly or where access makes inserting a conventional bolt difficult.
Once one end of an engineering stud has been installed into a housing, the mating component can be positioned over it and secured with a nut. The studs themselves can also help locate components during assembly.
For pressure-containing equipment and flanged joints, custom studs can be manufactured to particular dimensions, thread forms and material specifications where standard products are unsuitable.
Ultimately, bolts, setscrews and studs should be selected according to the joint design, loading, environment and relevant engineering standard. Their appearance may be similar, but small differences in the fastener can have a significant effect on how the finished assembly works.
FAQs
What Is the Main Difference Between a Bolt and a Setscrew?
In common UK fastener terminology, a hex bolt is usually partially threaded, while a hex setscrew is threaded for its full length or close to the underside of the head.
Is a Setscrew the Same as a Grub Screw?
Sometimes the terminology overlaps. A hex setscrew is generally a fully threaded fastener with a hexagonal head, while a socket set screw or grub screw is usually headless and used to secure components such as pulleys or collars to shafts.
Do Studs Always Have Threads Along Their Full Length?
No. Some studs are fully threaded, while double-ended engineering studs can have threaded sections at each end with a plain section between them.
Why Are Studbolts Commonly Used With Flanges?
Studbolts can pass through a flanged joint and be tightened using nuts at both ends, providing a practical way to create the required clamping force across the connection.
Can Bolts, Setscrews and Studs Be Made to Custom Sizes?
Yes. Non-standard fasteners can be manufactured to specific drawings, dimensions, thread forms, materials and applicable engineering standards where an off-the-shelf component is unsuitable.